Facing range of specific environments,SHP produced panels have adaptive filling materials,which has unique characteristic such as fire-proof,heat preservation,water-proof,noise reduction,etc.and have flexible features to high demand environments after special process on its galvanized skin,such as alkali(VHP) resistant,Acid resistant,Anti-static,etc.

Main Specification for Cleanroom Sandwich Panel

Key Advantages

1. Superior Contamination Control (Primary Advantage)

A. Exceptional Airtight Integrity

• • Hermetic Sealing: Proprietary tongue-and-groove joints with integrated EPDM/silicone gaskets create continuous compression seals, achieving air leakage rates < 0.5% @ 75 Pa

  • Pressure Differential Maintenance: Enables reliable positive/negative pressure containment critical for ISO-classified spaces

  • Particulate Barrier: Prevents infiltration of external contaminants and cross-contamination between zones

B. Cleanable, Non-particulating Surfaces

• • Smooth, Non-porous Facings: High-quality coatings (PVDF, epoxy, stainless steel) minimize particle adhesion and generation

  • Chemical Resistance: Withstands aggressive cleaning agents (IPA, hydrogen peroxide, quats) through >1,000 cleaning cycles

  • Seamless Integration: Eliminates crevices and joints where contaminants could accumulate

C. Low Contamination Emission

• • Controlled Material Selection: Cores (mineral wool, aluminum honeycomb) certified for low VOC/particle emission

  • Manufacturing Controls: Cleanroom production and packaging prevent pre-installation contamination

2. Structural & Performance Benefits

A. High Strength-to-Weight Ratio

• • Composite Action: Steel/aluminum facings provide tensile strength while lightweight cores offer compression resistance

  • Load Capacity: Wall panels withstand 0.7-2.0 kPa wind loads; ceiling panels support 30-150 kg point loads for FFU/equipment mounting

  • Deflection Resistance: Typically < L/240 under design loads, ensuring dimensional stability

B. Superior Flatness & Dimensional Accuracy

• • Factory Precision: Controlled manufacturing achieves ≤1mm deviation over 1m span

  • Consistent Installation: Modular design ensures predictable, repeatable results regardless of crew experience

  • Aesthetic Quality: Creates professional, high-tech appearance expected in controlled environments

C. Thermal Performance

• • Insulation Efficiency: U-values of 0.25-0.45 W/m²K reduce HVAC loads by 15-30% compared to conventional walls

  • Thermal Bridging Minimization: Continuous insulation and thermal breaks maintain consistent interior surface temperatures

  • Condensation Prevention: Meets dew point calculations per ISO 13788 standards

3. Installation & Operational Efficiency

A. Rapid Construction

• • Modular Assembly: Pre-fabricated panels install 3-5x faster than traditional stud-and-drywall construction

  • Reduced Labor: Standardized connections require fewer specialized trades on site

  • Weather Independence: Factory-finished components minimize weather-dependent site work

B. Flexibility & Adaptability

• • Reconfigurable: Panels can be disassembled and reinstalled with minimal material loss during facility changes

  • Service Integration: Pre-planned penetrations and raceways accommodate utilities without compromising integrity

  • Expansion Ready: Modular nature simplifies future facility expansion

C. Quality Control

• • Factory-controlled Conditions: 90% of work completed in controlled manufacturing environment

  • Predictable Performance: Each panel undergoes quality checks before shipment

  • Reduced Site Variability: Minimizes dependency on field craftsmanship for critical performance parameters

4. Regulatory & Compliance Advantages

A. Standards Compliance

• • Certified Systems: Panels tested and certified to:

    • ISO 14644 (Cleanroom standards)

    • EN 13964 (Suspended ceilings)

    • ASTM standards for fire, structural, and cleanability performance

  • Material Documentation: Full traceability with test reports, certificates of analysis, and material safety data sheets

B. Validation Support

• • Installation Protocols: Standardized methods support IQ/OQ documentation

  • Performance Data: Pre-tested systems provide predictable outcomes for validation protocols

  • Audit-ready: Complete material documentation simplifies regulatory inspections

5. Lifecycle Economic Benefits

A. Reduced Operating Costs

• • Energy Savings: Superior insulation reduces HVAC energy consumption by 20-40%

  • Lower Maintenance: Durable surfaces require only routine cleaning; no repainting or refinishing needed

  • Reduced Downtime: Rapid installation and reconfiguration minimize production interruptions

B. Long-term Durability

• • Service Life: Properly maintained systems last 25+ years without significant degradation

  • Corrosion Resistance: Factory-applied coatings provide 20+ year warranty against corrosion

  • Wear Resistance: Surfaces maintain cleanability and appearance through decades of use

C. Risk Mitigation

• • Contamination Control: Reduces product loss and recall risks in sensitive manufacturing

  • Fire Safety: Non-combustible cores provide inherent fire protection

  • Business Continuity: Reliable performance supports consistent production quality

6. Specialized Performance Features

A. Fire Performance

• • A-rated Cores: Mineral wool and aluminum honeycomb achieve Euroclass A1/A2 ratings

  • Fire Resistance: Systems provide up to 120 minutes of fire resistance (EI 120)

  • Low Smoke Toxicity: Critical for occupied spaces and sensitive equipment protection

B. Acoustic Control

• • Noise Reduction: STC ratings of 35-50 dB for typical wall constructions

  • Equipment Isolation: Helps contain equipment noise within designated areas

  • Speech Privacy: Supports confidential conversations in laboratory and medical settings

C. Electrostatic Control

• • ESD Options: Conductive and static-dissipative surfaces (10⁶-10⁹ Ω/sq) for electronics manufacturing

  • Grounding Integration: Built-in grounding paths for comprehensive static control

Products Description

Handmade Panel

-Strong,Flat,Durable,Light,Easy for Installation

Machinemade Panel

-Economic,Flat,Durable,Light,Easy for Installation

Related Products

Company Profile

As a leading supplier of clean room system and clean room products,SHP is an organization that prides itself both on technical expertise as well as next level customer care.SHP offers Cleanroom Solutions to meet our clients' particular requirements specialized for pharmaceutical,biotechnology and microelectronic cleanrooms.We also provide a range of Clean Room products including wall panel,door&window and a series of clean room equipment.

As an ISO 9001:2015 certified organization,we are committed to continually improving our customer service programs while meeting or exceeding your product quality criteria.With our comprehensive customer solution offerings,excellence in products,and decades of technical expertise,we are confident that SHP can match the best to your application.

Our Certification

Our Customers

FAQ

Q1: Where is your company?

A1:Our company is located in Suzhou City, close to Shanghai. It's a 1.5-hour drive from PVG Airport.

Q2: Are you a manufacturer or a trading company? What can I buy from you?
A2: We are manufacturers. We focus on cleanroom projects, air showers, FFUs, through boxes, dosing rooms, laminar flow hoods and benches, AHUs, and sealed doors and Windows. 

Q3:When is your delivery time? 
A3: If your cleanroom project includes AHU, the delivery time is 35 days. If you purchase goods without an AHU, the delivery time is 10 days. 

Q4: How long is your warranty period? What kind of after-sales service can you offer?
A4: Our warranty period is two years after the completion of the project. During the warranty period, if there are any problems, we will replace it. If you can't handle it, we will send an engineer to solve it for free.

Q5:Can you conduct cleanroom validation? 
A5: Yes, we can offer documentaries of DQ, IQ, OQ and PQ. Still fat & Sitting. Product operation manual, maintenance guide and a complete set of cleanroom drawings. 

Q6:What are your advantages?
A6: We have a complete technical team consisting of 12 senior cleanroom and HVAC engineers to provide you with technical support. We have completed over 2,100 cleanroom projects in China and overseas. Such as Japan, Indonesia, Thailand, Bangladesh, India, North Macedonia, Saudi Arabia, Yemen, Russia, Moldova, Switzerland, Norway, the United Kingdom, Spain, France, Belgium, Kuwait, Tunisia, Mauritius, Sri Lanka, Mongolia, Philippines, Nepal, Sudan, Somaliland, Australia, New Zealand, Canada, Algeria, Egypt, Singapore, and the United States.